Zebra Z6M Manuale Utente Scaricare il pdf (Pagina 75)

Zebra Z4M/Z6M Printers User’s Guide 67

5HZLQG0HGLD$OLJQPHQW

(Rewind option required)

NOTE: The media /backing should be installed flush against the backplate of

the take-up spindle to prevent the media/backing from winding too loosely.

Perform the following adjustment if the media does not track properly onto the

take-up spindle.

Refer to Figure 29.

1. Turn the adjustment dial clockwise to align the media/backing material toward the

inboard (i.e., mainframe or electronics) side. This is the most likely adjustment.

2. Turn the dial counterclockwise to align the media/backing material toward the

outboard (i.e., away from the mainframe or electronics) side.

Figure 29

Printhead

Assembly

Adjustment

Dial

Take-up

Spindle

Backplate

1 2 ... 70 71 72 73 74 75 76 77 78 79 80 ... 111 112

Nessun commento

Zebra Z6M Manuale Utente Pagina 75